Titan Flow Control YS 12-CI Threaded Cast Iron Y-Strainer

Description

Titan Flow Control's ANSI Class 250 Cast Iron Y-Strainers are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, turbines, and much more. Y strainers can be installed in a horizontal or vertical pipeline as long as the screen is in a downward position. Straining is accomplished via an internal perforated or mesh lined straining element, the size which should be determined based on the size of the smallest particle to be removed.

Note: The straining element needs regular cleaning to prevent debris build up. It is not advisable to allow the differential pressure to increase by 20 PSI. Although cleaning normally requires the removal of the straining element, installing and using a Titan Blow-Off Drain Valve can increase the time between cleanings.

Features

Large Straining Capacity: With its large body and sizable straining element, the YS12 provides excellent open area ratios that are typically two-and-a-half times larger than the corresponding pipeline
Precision Machined Seats: Precision machined screen seats in both the body and cap help to ensure accurate positioning for the screen during reassembly after cleaning - Also, the machined body seats enable finer filtration by preventing debris bypass
Self Cleaning Capability: With a tapped NPT blow-off connection this unit can be fitted with a blow-down valve which facilitates cleaning of the straining element
Epoxy Painted: All units are epoxy painted to help resist rust and corrosion
Threaded Cap: Titan's YS12 has straight threads to permit easy cap removal for cleaning and proper alignment when reassembling strainer
Natural Gas and Other Special Applications: Titan has extensively tested the YS12 in gas applications and has determined that Nitrile Rubber gaskets provide superb sealing capabilities for the service - Please call if a special gasket or screen is required for your application

Specifications

Sizes: 1/4 - 3 in.
End Type: Threaded
Material: Cast Iron (A126 Gr. B) - Lead Free
Type: Y (Wye) Strainer
ANSI Class: 250
Pressure/Temperature Rating: 400 PSI @ 150°F
Referenced Standards & Codes: ASME/ANSI B16.4 - Cast Iron Threaded Fittings
1/4 - 2 in. Standard Screen Selections:

Liquid: 20 Mesh
Open Area: 51.8%

2 1/2 - 3 in. Standard Screen Selections:

Liquid: 1/16 (.0625)
Open Area: 41%

Y Strainer - Installation - Operation - Maintenance Manual (PDF Download)