Titan Flow Control YS 54-AB Flanged Aluminum Bronze Y-Strainer - ANSI Class 150

Brand :

(No reviews yet) Write a Review
$1,144.33 - $19,374.05
SKU:
YS 54-AB
Sale

Titan Flow Control's YS54-AB is used for potable water applications as it meets lead free statutes requiring that the lead content in the wetted surfaces is 0.25% or less as determined by a weighted average. These ANSI Class 150 Aluminum Bronze Y-Strainers are installed in a piping system to remove unwanted debris from the pipeline, protecting expensive equipment downstream such as pumps, meters, spray nozzles, compressors, turbines, and much more. Y strainers can be installed in a horizontal or vertical pipeline as long as the screen is in a downward position. Straining is accomplished via an internal perforated or mesh lined straining element, the size which should be determined based on the size of the smallest particle to be removed.

Note: The straining element needs regular cleaning to prevent debris build up. It is not advisable to allow the differential pressure to increase by 20 PSI. Although cleaning normally requires the removal of the straining element, installing and using a Titan Blow-Off Drain Valve can increase the time between cleanings.

 

Features

  • New Design w/ Gauge Taps: Convenient gauge taps furnished with a plug on both the inlet and outlet sides of sizes 2 - 12 in - These taps allow for easy installation of pressure gauges to monitor differential pressure and determine when screen cleaning is necessary
  • ASTM B148 Body Material: Aluminum Bronze is stronger and less likely to corrode than other bronze alloys, making them a preferred choice for sea water and other applications where corrosion is a concern - because of its copper content, marine organisms cannot colonize on the material
  • Large Straining Capacity: With its large body and sizable straining element, the YS58 provides excellent open area ratios that are typically two-and-a-half times larger than the corresponding pipeline
  • Precision Machined Seats: Precision machined screen seats in both the body and cap help to ensure accurate positioning for the screen during reassembly after cleaning - Also, the machined body seats enable finer filtration by preventing debris bypass
  • Self Cleaning Capability: With a tapped NPT blow-off connection this unit can be fitted with a blow-down valve which facilitates cleaning of the straining element

 

Specifications

  • Sizes: 2 - 8 in. - Larger sizes available - Please call for more information
  • End Type: Flanged
  • Material: Aluminum Bronze (ASTM B148 Gr.9D) - Lead Free
  • Type: Y (Wye) Strainer
  • ANSI Class: 150
  • Pressure/Temperature Rating: 225 PSI @ 150°F
  • Referenced Standards & Codes: ASME/ANSI B16.24 - Cast Copper Alloy Pipe Flanges and Flanged Fittings
  • 2 - 4 in. Standard Screen Selections:
    • Liquid: 1/16 (.0625)
    • Open Area: 41%
  • 6 - 8 in. Standard Screen Selections:
    • Liquid: 1/8 (.125)
    • Open Area: 40%

 

Y Strainer - Installation - Operation - Maintenance Manual (PDF Download)